Tank, Silo and Stack Demolition in Fort Worth, TX

We perform tank, silo, and stack demolition in Fort Worth, TX at industrial and agricultural sites. Vertical structures are dismantled piece by piece or felled in a controlled manner depending on constraints. Hot work, confined spaces, and fall protection are managed by experienced crews. Remove obsolete storage and stacks safely with professional demolition planning.

Legendary Demolition Company Fort Worth provides professional tank demolition throughout Fort Worth, TX, Texas and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 682-324-6600 or request your free quote.

Tank, Silo and Stack Demolition in Fort Worth, Done the Right Way

Tank, silo and stack demolition is not just “big equipment and brute force.” It is controlled removal of heavy, often elevated structures that may contain fuel residues, grain dust, chemicals, or years of rust. At Legendary Demolition Company Fort Worth, we focus on real site conditions found in and around Fort Worth, from aging tanks at older industrial yards on the Northside to concrete grain silos near rail corridors and metal stacks at smaller manufacturing facilities.

When we visit your property, we first look at what the structure was used for. Fuel storage, water, dry bulk, or chemical processing all create different hazards. A steel oil tank beside a trucking depot off I 35W has different risks than a concrete grain silo near the Stockyards. We also evaluate clearances, overhead power lines, nearby buildings, rail tracks, and public streets. The goal is simple. Plan a method that brings the structure down in a controlled way, keeps debris inside a defined footprint, and limits disruption to your operations or neighbors.

Legendary Demolition Company Fort Worth is built around straightforward communication. We explain the options and the limits. If a tank is too close to a property line to be felled in one piece, we tell you and plan for sectional cutting instead. If a stack is too deteriorated for workers to climb safely, we design a crane or high reach solution and show you how that affects cost and schedule.

How We Plan a Tank, Silo or Stack Demolition Project

Every project starts with a site assessment and structural review. Our crew measures height, diameter, wall thickness, and foundation type. Older steel tanks around Fort Worth often have undocumented modifications, such as welded repairs or added piping, so we note every penetration and connection. For silos and stacks, we check for spalling concrete, exposed rebar, or buckling steel that could change how the structure behaves when cut.

Next, we identify what is inside and around the structure. Tanks may have sludge at the bottom, flammable vapors, or internal coatings. Silos may still contain grain, powder, or combustible dust. Stacks can hold soot, ash, or residues from past production. Before any cutting starts, the interior must be cleaned, inerted, or made safe, which we coordinate with your environmental contractor or provide through our trusted local partners when needed.

We then choose the demolition method. Options include cold cutting and crane removal of sections, mechanical felling using excavators and torch cutting, or piecemeal dismantling from the top down. In tight Fort Worth industrial parks, sectional dismantling with a crane is often safest to avoid encroaching on neighboring tenants. On rural or larger tracts outside the city core, it may be more economical to cut and tip a tank in a controlled drop zone, then process it on the ground. Our written plan spells out access routes for equipment, exclusion zones, sequence of cuts, and how we will protect adjacent utilities like gas lines and buried electrical.

Step by Step: How Tank Demolition Is Actually Performed

Tank demolition usually follows a clear sequence. First, we isolate and disconnect all lines, pumps, and utilities. Any remaining product is removed by a specialized contractor if it is hazardous. Once the tank is verified as gas free and safe to cut, we open manways and vents to provide cross ventilation. Air monitoring can be used on sensitive sites with hydrocarbon history.

For steel tanks, we often start by cutting access openings at ground level so machinery can reach interior supports if needed. Using torches or cold cutting methods when sparks are not acceptable, we cut vertical slots in the shell to control how the tank will deform. If the site allows a controlled fall, we cut a wedge section on one side and leave a hinge on the opposite side. Excavators then apply pushing force while spotters monitor movement. The tank is guided into a predetermined laydown area that has been cleared and bermed if necessary.

If space is tight, we use a crane to remove the roof in one or more picks, then cut the shell into ring sections from the top down. Each ring is rigged, supported, cut free in stages, and lowered to the ground. Once the main shell is down, we shear or torch cut the steel into recyclable sizes. Concrete ring walls or pads are broken with hydraulic hammers. Every step is based on real access conditions at your Fort Worth site, not a one size fits all template.

Demolishing Silos and Stacks Safely Around Fort Worth

Silos and stacks introduce height and stability issues that must be managed carefully. Many grain silos in the Fort Worth area are reinforced concrete, often 60 to 120 feet tall, with adjoining headhouses and conveyor systems. Older smokestacks may be brick or concrete, while newer ones are often steel with internal liners.

For reinforced concrete silos, one method is mechanical top down removal. We use manlifts or crane baskets to allow workers to chip or saw cut sections, then drop debris inside the silo or into a controlled zone. Another option is to cut openings at strategic points near the base, then use high reach excavators to pull sections inward. We avoid uncontrolled collapses, especially near active rail spurs, utilities, or neighboring businesses.

Stacks are often dismantled rather than dropped, especially within the city limits of Fort Worth where vibration and dust complaints are a concern. We may remove guy wires, platforms, ladders, and ductwork first. Then we cut the stack in segments that the crane can safely handle. Each segment is rigged with redundant slings, cut free, swung to a laydown area, and processed. If a stack is severely deteriorated, we may brace or collar it before any cuts are made. Our crew coordinates with you on timing to minimize impact on ongoing plant operations.

What Drives Cost and Schedule for Tank, Silo and Stack Demolition

Several factors determine the price and timeline for tank, silo, and stack demolition in Fort Worth. Height and size are obvious, but the real drivers are access, interior conditions, and regulatory requirements. A clean, empty water tank with open ground all around will be faster and less expensive than a fuel tank in a crowded yard with contaminated soils.

Interior residue is a major cost factor. Tanks with heavy sludge, product heel, or hazardous coatings require cleaning and proper disposal before demolition. Similarly, silos with caked on material or stacks with regulated residues need special handling. These steps can add days or weeks, and we factor them into the schedule from the start so you are not surprised.

Access for cranes and large excavators matters as well. Narrow drives common in older Fort Worth industrial zones can limit the size of equipment we can bring in. That sometimes means more manual cutting and smaller picks, which affects labor hours. Overhead lines, nearby occupied buildings, and active utilities all add to the planning and protection measures required. During our bid process, Legendary Demolition Company Fort Worth walks your site, discusses your end use goals for the land, and gives you a clear breakdown of which conditions are driving cost and how scope adjustments could change the price.

What Fort Worth Property Owners Should Know Before Hiring

Before you hire anyone for tank demolition or removal of a silo or stack, confirm that they understand both demolition and environmental coordination. Demolition contractors typically do not perform tank cleaning or waste profiling themselves, but they must know how to sequence work with those trades and with local landfills and recyclers. Legendary Demolition Company Fort Worth routinely coordinates with environmental firms in North Texas to keep projects aligned with TCEQ and City of Fort Worth requirements.

Ask to see a project specific plan, not just a generic safety sheet. For your structure, the contractor should be able to show the chosen method, the direction of any planned fall, the exclusion zones, and how adjacent structures and the public will be protected. If explosive or implosion methods are being suggested, be cautious. In the Fort Worth area, mechanical and sectional methods are far more common because they give better control in built up environments.

Also confirm insurance and experience with elevated work. Removing a 100 foot stack near a warehouse district is a different risk than tearing down a small storage shed. Ensure the contractor carries adequate liability and workers comp coverage and can provide references for similar height and structure type. Finally, talk through your post demolition needs. If you need only removal to grade, that is one scope. If you want foundation removal, backfill, grading, or preparation for redevelopment, tell us up front so Legendary Demolition Company Fort Worth can price the complete solution and leave your Fort Worth site ready for its next use.